View US2884LSE_4141884.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

US2884
Bipolar Hall Switch - Very High Sensitivity Features and Benefits
Wide operating voltage range from 3.5V to 24V Very high magnetic sensitivity CMOS technology Chopper-stabilized amplifier stage Low current consumption Open drain output Thin SOT23 3L RoHS Compliant package
Application Examples
Automotive, Consumer and Industrial Solid-state switch Brushless DC motor commutation Speed detection Linear position detection Angular position detection Proximity detection
Ordering Information
Part No. US2884 Temperature Code L (-40 to 150C) C Package Code SE (TSOT-3L)
1 Functional Diagram
2 General Description
The Melexis US2884 is a bipolar Hall-effect switch designed in mixed signal CMOS technology. The device integrates a voltage regulator, Hall sensor with dynamic offset cancellation system, Schmitt trigger and an open-drain output driver, all in a single package. Due to its wide operating voltage range and temperature range it is particularly suitable for use in automotive and BLDC motor applications. The device is delivered in a Thin Small Outline Transistor (TSOT) RoHS compliant 3-lead package.
3901002884 Rev 004
Page 1 of 11
Data Sheet Jan/06
US2884
Bipolar Hall Switch - Very High Sensitivity Table of Contents
1 Functional Diagram ........................................................................................................ 1 2 General Description........................................................................................................ 1 3 Glossary of Terms .......................................................................................................... 3 4 Absolute Maximum Ratings ........................................................................................... 3 5 Pin Definitions and Descriptions................................................................................... 3 6 General Electrical Specifications .................................................................................. 4 7 Magnetic Specifications ................................................................................................. 4 8 Output Behaviour versus Magnetic Pole ...................................................................... 4 9 Detailed General Description ......................................................................................... 5 10 Unique Features............................................................................................................ 5 11 Performance Graphs .................................................................................................... 6
11.1 Magnetic parameters vs. TA.....................................................................................................................6 11.2 Magnetic parameters vs. VDD...................................................................................................................6 11.3 VDSon vs. TA ..............................................................................................................................................6 11.4 VDSon vs. VDD ............................................................................................................................................6 11.5 IDD vs. TA ..................................................................................................................................................6 11.6 IDD vs. VDD ................................................................................................................................................6 11.7 IOFF vs. TA .................................................................................................................................................7 11.8 IOFF vs. VDD ...............................................................................................................................................7
12 Test Conditions............................................................................................................. 7
12.1 Supply Current .........................................................................................................................................7 12.2 Output Saturation Voltage .......................................................................................................................7 12.3 Output Leakage Current ..........................................................................................................................7 12.4 Magnetic Thresholds ...............................................................................................................................7
13 Application Information................................................................................................ 8
13.1 Typical Three-Wire Application Circuit ....................................................................................................8 13.2 Two-Wire Circuit ......................................................................................................................................8 13.3 Automotive and Harsh, Noisy Environments Three-Wire Circuit ............................................................8
14 Application Comments ................................................................................................. 8 15 Standard information regarding manufacturability of Melexis products with different soldering processes........................................................................................... 9 16 ESD Precautions ........................................................................................................... 9 17 SE Package Information (TSOT23-3L)....................................................................... 10 18 Disclaimer.................................................................................................................... 11
3901002884 Rev 004
Page 2 of 11
Data Sheet Jan/06
US2884
Bipolar Hall Switch - Very High Sensitivity
3 Glossary of Terms
MilliTesla (mT), Gauss RoHS TSOT ESD BLDC Units of magnetic flux density: 1mT = 10 Gauss Restriction of Hazardous Substances Thin Small Outline Transistor (TSOT package) - also referred with the Melexis package code "SE" Electro-Static Discharge Brush-Less Direct-Current
4 Absolute Maximum Ratings
Parameter Symbol Supply Voltage VDD Supply Current IDD Output Voltage VOUT Output Current IOUT Operating Temperature Range TA Storage Temperature Range TS Maximum Junction Temperature TJ Table 1: Absolute maximum ratings Value 28 50 28 50 -40 to 150 -50 to 150 165 Units V mA V mA C C C
Exceeding the absolute maximum ratings may cause permanent damage. Exposure to absolute-maximumrated conditions for extended periods may affect device reliability.
5 Pin Definitions and Descriptions
Pin Name Type 1 VDD Supply 2 OUT Output 3 GND Ground Table 2: Pin definitions and descriptions Function Supply Voltage pin Open Drain Output pin Ground pin
3901002884 Rev 004
Page 3 of 11
Data Sheet Jan/06
US2884
Bipolar Hall Switch - Very High Sensitivity
6 General Electrical Specifications
DC Operating Parameters TA = 25 C, VDD = 3.5V to 24V (unless otherwise specified) Parameter Symbol Supply Voltage VDD Supply Current IDD Output Saturation Voltage VDSon Output Leakage Current IOFF Output Rise Time tr Output Fall Time tf Maximum Switching Frequency FSW Package Thermal Resistance RTH Table 3: Electrical specifications Test Conditions Operating B < BRP IOUT = 20mA, B > BOP B < BRP, VOUT = 24V VDD=12V, RL = 1k, CL = 20pF VDD=12V, RL = 1k, CL = 20pF Single layer (1S) Jedec board Min 3.5 Typ Max 24 5 0.5 10 Units V mA V A s s KHz C/W
o
0.01 0.25 0.25 10 301
7 Magnetic Specifications
DC Operating Parameters TA = -40 C to 150 C, VDD = 4V to 24V (unless otherwise specified) Parameter Symbol Operating Point BOP Release Point BRP Hysteresis BHYST Table 4: Magnetic specifications Test Conditions Min -2 -6 1 Typ Max 6 2 6 Units mT mT mT
o o
Note 1: For typical values, please refer to the performance graphs in section 11
8 Output Behaviour versus Magnetic Pole
DC Operating Parameters TA = -40 C to 150 C, VDD = 3.5V to 24V (unless otherwise specified) Parameter Test Conditions OUT South pole B > BOP Low North pole B < BRP High Table 5: Output behaviour versus magnetic pole Note 1: The magnetic pole is applied facing the branded side of the package
o o
South pole
North pole
OUT = low (VDSon)
OUT = high
3901002884 Rev 004
Page 4 of 11
Data Sheet Jan/06
US2884
Bipolar Hall Switch - Very High Sensitivity
9 Detailed General Description
Based on mixed signal CMOS technology, Melexis US2884 is a Hall-effect device with very high magnetic sensitivity. It allows using generic magnets, weak magnets or larger air gap. The chopper-stabilized amplifier uses switched capacitor technique to suppress the offset generally observed with Hall sensors and amplifiers. The CMOS technology makes this advanced technique possible and contributes to smaller chip size and lower current consumption than bipolar technology. The small chip size is also an important factor to minimize the effect of physical stress. This combination results in more stable magnetic characteristics and enables faster and more precise design. The wide operating voltage from 3.5V to 24V, wide operating temperature according to "L" specification and low current consumption make this device especially suitable for automotive and BLDC motor applications. The output signal is open-drain type. Such output allows simple connectivity with TTL or CMOS logic by using a pull-up resistor tied between a pull-up voltage and the device output.
10 Unique Features
The US2884 exhibits bipolar magnetic switching characteristics. Therefore, it operates with both south and north poles.
Typically, the device behaves as a latch with symmetric operating and release switching points (BOP=|BRP|). This means magnetic fields with equivalent strength and opposite direction drive the output high and low. Removing the magnetic field (B0) keeps the output in its previous state. This latching property defines the device as a magnetic memory.
Latch characteristic
Depending on the magnetic switching points, the device may also behave as a unipolar positive switch (BOP and BRP strictly positive) or negative switch (BOP and BRP strictly negative). That is the output can be set high and low by only using one magnetic pole. In such case, removing the magnetic field changes the output level.
Unipolar positive switch characteristic
Unipolar negative switch characteristic
In latch, positive or negative switch behaviour, a magnetic hysteresis BHYST keeps BOP and BRP separated by a minimal value. This hysteresis prevents output oscillation near the switching point.
3901002884 Rev 004
Page 5 of 11
Data Sheet Jan/06
US2884
Bipolar Hall Switch - Very High Sensitivity
11 Performance Graphs
11.1 Magnetic parameters vs. TA
6
11.2 Magnetic parameters vs. VDD
6
3 Magnetic field (mT) Magnetic field (mT)
3
0
0
-3
Bop, VDD=4V Brp, VDD=4V Bhyst, VDD=4V
Bop, VDD=24V Brp, VDD=24V Bhyst, VDD=24V
-3
Bop, Ta=25 C Brp, Ta=25 C Bhyst, Ta=25 C
Bop, Ta=150 C Brp, Ta=150 C Bhyst, Ta=150 C
-6 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Ta ( C)
-6 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 VDD (Volts)
11.3 VDSon vs. TA
11.4 VDSon vs. VDD
0.5 Ta = -40 C
0.4
VDD = 3.5V VDD = 12V VDD = 24V
0.4
Ta = 25 C Ta = 85 C Ta = 150 C
VDSon (Volts)
VDSon (Volts) -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0.3
0.2
0.2
0.1
0 Ta ( C)
0 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 VDD (Volts)
11.5 IDD vs. TA
5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Ta ( C) VDD = 3.5V VDD = 12V VDD = 24V
11.6 IDD vs. VDD
5 4.5 4 3.5 3 2.5 2 1.5 Ta = -40 C 1 0.5 0 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 VDD (Volts) Ta = 25 C Ta = 85 C Ta = 150 C
IDD (mA)
3901002884 Rev 004
Page 6 of 11
IDD (mA)
Data Sheet Jan/06
US2884
Bipolar Hall Switch - Very High Sensitivity
11.7 IOFF vs. TA
60
11.8 IOFF vs. VDD
60 VDD = 3.5V
50
VDD = 12V VDD = 24V
50
Ta = 25 C Ta = 85 C
40
40 Ioff (A)
Ta = 150 C
Ioff (A)
30
30
20
20
10
10
0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Ta ( C)
0 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 VDD (Volts)
12 Test Conditions
Note : DUT = Device Under Test
12.1 Supply Current
12.2 Output Saturation Voltage
12.3 Output Leakage Current
12.4 Magnetic Thresholds
3901002884 Rev 004
Page 7 of 11
Data Sheet Jan/06
US2884
Bipolar Hall Switch - Very High Sensitivity
13 Application Information
13.1 Typical Three-Wire Application Circuit 13.2 Two-Wire Circuit
13.3 Automotive and Harsh, Noisy Environments Three-Wire Circuit
Note: With this circuit, precise ON and OFF currents can be detected using only two connecting wires. The resistors RL and Rb can be used to bias the input current. Refer to the part specifications for limiting values. BRP : BOP : IOFF = IR + IDD = VDD/Rb + IDD ION = IOFF + IOUT = IOFF + VDD/RL
14 Application Comments
For proper operation, a 100nF bypass capacitor should be placed as close as possible to the device between the VDD and ground pin. For reverse voltage protection, it is recommended to connect a resistor or a diode in series with the VDD pin. When using a resistor, three points are important: - the resistor has to limit the reverse current to 50mA maximum (VCC / R1 50mA) - the resulting device supply voltage VDD has to be higher than VDD min (VDD = VCC - R1.IDD) 2 - the resistor has to withstand the power dissipated in reverse voltage condition (PD = VCC / R1) When using a diode, a reverse current cannot flow and the voltage drop is almost constant (0.7V). Therefore, a 100/0.25W resistor for 5V application and a diode for higher supply voltage are recommended. Both solutions provide the required reverse voltage protection. When a weak power supply is used or when the device is intended to be used in noisy environment, it is recommended that figure 13.3 from the Application Information section is used. The low-pass filter formed by R1 and C1 and the zener diode Z1 bypass the disturbances or voltage spikes occurring on the device supply voltage VDD. The diode D1 provides additional reverse voltage protection.
3901002884 Rev 004
Page 8 of 11
Data Sheet Jan/06
US2884
Bipolar Hall Switch - Very High Sensitivity
15 Standard information regarding manufacturability of Melexis products with different soldering processes
Our products are classified and qualified regarding soldering technology, solderability and moisture sensitivity level according to following test methods: Reflow Soldering SMD's (Surface Mount Devices) * IPC/JEDEC J-STD-020 Moisture/Reflow Sensitivity Classification for Nonhermetic Solid State Surface Mount Devices (classification reflow profiles according to table 5-2) EIA/JEDEC JESD22-A113 Preconditioning of Nonhermetic Surface Mount Devices Prior to Reliability Testing (reflow profiles according to table 2)
*
Wave Soldering SMD's (Surface Mount Devices) and THD's (Through Hole Devices) * * EN60749-20 Resistance of plastic- encapsulated SMD's to combined effect of moisture and soldering heat EIA/JEDEC JESD22-B106 and EN60749-15 Resistance to soldering temperature for through-hole mounted devices
Iron Soldering THD's (Through Hole Devices) * EN60749-15 Resistance to soldering temperature for through-hole mounted devices
Solderability SMD's (Surface Mount Devices) and THD's (Through Hole Devices) * EIA/JEDEC JESD22-B102 and EN60749-21 Solderability
For all soldering technologies deviating from above mentioned standard conditions (regarding peak temperature, temperature gradient, temperature profile etc) additional classification and qualification tests have to be agreed upon with Melexis. The application of Wave Soldering for SMD's is allowed only after consulting Melexis regarding assurance of adhesive strength between device and board. Melexis is contributing to global environmental conservation by promoting lead free solutions. For more information on qualifications of RoHS compliant products (RoHS = European directive on the Restriction Of the use of certain Hazardous Substances) please visit the quality page on our website: http://www.melexis.com/quality.asp
16 ESD Precautions
Electronic semiconductor products are sensitive to Electro Static Discharge (ESD). Always observe Electro Static Discharge control procedures whenever handling semiconductor products.
3901002884 Rev 004
Page 9 of 11
Data Sheet Jan/06
US2884
Bipolar Hall Switch - Very High Sensitivity
17 SE Package Information (TSOT23-3L)
2.75 BSC 1.60 BSC
see note 2
1.10 MAX
SEATING PLANE
0.88 +0.02 - 0.03 0.075 +0.025 - 0.050
Notes: 1. All dimensions are in millimeters 2. Outermost plastic extreme width does not include mold flash or protrusions. Mold flash and protrusions shall not exceed 0.15mm per side. 3. Outermost plastic extreme length does not include mold flash or protrusions. Mold flash and protrusions shall not exceed 0.25mm per side. 4. The lead width dimension does not include dambar protrusion. Allowable dambar protrusion shall be 0.07mm total in excess of the lead width dimension at maximum material condition. 5. Dimension is the length of terminal for soldering to a substrate.
0.50 BSC
6. Dimension on SECTION B-B' are apply to the flat section of the lead between 0.08mm and 0.15mm from the lead tip. 7. Formed lead shall be planar with respect to one another with 0.076mm at seating plane.
TOP VIEW SIDE VIEW
12 REF. TYP.
BASE METAL WITH PLATING
Marking: Top side : 2884 - Name of the Device Bottom side : xyww x = last digit of lot number y = last digit of year ww = week
0.10 R. MIN.
~ 0.10 R. MIN.
SEATING PLANE
B' B 0.35 +0.05 - 0.10 0.30 0.45
4+/-4
0.40+/-0.10
see note 5
0.575 REF.
SECTION B-B'
see note 6
END VIEW
Hall plate location
1.417+/-0.05
Notes: 1. All dimensions are in millimeters
0.275 TYP
END VIEW
Package line
TOP VIEW
3901002884 Rev 004
Page 10 of 11
Data Sheet Jan/06
US2884
Bipolar Hall Switch - Very High Sensitivity
18 Disclaimer
Devices sold by Melexis are covered by the warranty and patent indemnification provisions appearing in its Term of Sale. Melexis makes no warranty, express, statutory, implied, or by description regarding the information set forth herein or regarding the freedom of the described devices from patent infringement. Melexis reserves the right to change specifications and prices at any time and without notice. Therefore, prior to designing this product into a system, it is necessary to check with Melexis for current information. This product is intended for use in normal commercial applications. Applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical lifesupport or life-sustaining equipment are specifically not recommended without additional processing by Melexis for each application. The information furnished by Melexis is believed to be correct and accurate. However, Melexis shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interrupt of business or indirect, special incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of Melexis' rendering of technical or other services. (c) 2005 Melexis NV. All rights reserved.
For the latest version of this document, go to our website at www.melexis.com Or for additional information contact Melexis Direct: Europe, Africa, Asia:
Phone: +32 1367 0495 E-mail: sales_europe@melexis.com
America:
Phone: +1 603 223 2362 E-mail: sales_usa@melexis.com
ISO/TS 16949 and ISO14001 Certified
3901002884 Rev 004
Page 11 of 11
Data Sheet Jan/06

▲Up To Search▲

Price & Availability of US2884LSE

	To Download US2884LSE Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .